Working with environment variables is a great way to configure different aspects of your Node.js application. Many cloud hosts (Heroku, Azure, AWS, now.sh, etc.) and Node.js modules use environment variables. Hosts, for example, will set a PORT variable that specifies on which port the server should listen to properly work. Modules might have different behaviors (like logging) depending on the value of NODE_ENV variable.

• Activate Conda Environment In Powershell
• Create .env File React

Here are some of my tricks and tools when working with environment variables in Node.js.

The Basics

Accessing environment variables in Node.js is supported right out of the box. When your Node.js process boots up it will automatically provide access to all existing environment variables by creating an env object as property of the process global object. If you want to take a peek at the object run the the Node.js REPL with node in your command-line and type:

This code should output all environment variables that this Node.js process is aware of. To access one specific variable, access it like any property of an object:

You should see that the value of PORT is undefined on your computer. Cloud hosts like Heroku or Azure, however, use the PORT variable to tell you on which port your server should listen for the routing to work properly. Therefore, the next time you set up a web server, you should determine the port to listen on by checking PORT first and giving it a default value otherwise:

The highlighted line will take the value of the PORT if it’s available or default to 3000 as a fallback port to listen on. Try running the code by saving the it in a file like server.js and run:

An env file for a specific mode (e.g.env.production) will take higher priority than a generic one (e.g.env). In addition, environment variables that already exist when Vue CLI is executed have the highest priority and will not be overwritten by.env files. Hey @themagicbean!I faced the same issue recently, you can try uploading a.env file from your device. It works for me:D. Now, create a file called.env and add the following one line of code inside that.env file. You need to create the.env file in the root of your project folder. Now, write the following code inside the app.js file. The Action looks for environment variables that start with envkey and creates an envfile with them. These are defined in the with section of the Action config. Here is an example of it in use.

The output should be a message saying Server is listening on port 3000. Stop the server with Ctrl+C and restart it with the following command:

The message should now say Server is listening on port 9999 since the PORT variable has been temporarily set for this execution by the PORT=9999 in front of node.

Since process.env is simply a normal object we can set/override the values very easily:

The code above will set or override the value of MY_VARIABLE. However, keep in mind that this value is only set during the execution of this Node.js process and is only available in child processes spawned by this process. Overall you should avoid overriding environment variables as much as possible though and rather initialize a config variable as shown in the PORT example.

Explicitly loading variables from .env files

Activate Conda Environment In Powershell

If you develop on multiple different Node.js projects on one computer, you might find you have overlapping environment variable names. For example, different messaging apps might need different Twilio Messaging Service SIDs, but both would be called TWILIO_MESSAGE_SERVICE_SID. A great way to achieve project specific configuration is by using .env files. These files allow you to specify a variety of different environment variables and their values.

Typically you don’t want to check these files into source control so when you create one you should add .env to your your .gitignore. You will see in a lot of Twilio demo applications .env.example files that you can then copy to .env and set the values yourself. Having an .env.example or similar file is a common practice if you want to share a template file with other people in the project.

How do we load the values from this file? The easiest way is by using an npm module called dotenv. Simply install the module via npm:

Afterwards add the following line to the very top of your entry file:

This code will automatically load the .env file in the root of your project and initialize the values. It will skip any variables that already have been set. You should not use .env files in your production environment though and rather set the values directly on the respective host. Therefore, you might want to wrap your load statement in an if-statement:

With this code we will only load the .env file if the server isn’t started in production mode.

Let’s see this in action. Install dotenv in a directory as shown above. Create an dotenv-example.js file in the same directory and place the following lines into it:

Afterwards, create a file called .env in the same directory with this content:

Run the script:

The output should look like:

As you can see the value was loaded and defined using dotenv. If you re-run the same command with NODE_ENV set to production you will see that it will stay undefined.

Now the output should be:

If you don’t want to modify your actual code you can also use Node’s -r argument to load dotenv when executing the script. Change your dotenv-example.js file:

Now execute the file first normally:

The script should print that the current value for FOO is undefined. Now execute it with the appropriate flag to require dotenv:

The result is that FOO is now set to bar since the .env file has been loaded.

An alternative way to load .env files

Now dotenv is great but there was one particular thing that bothered me personally during my development process. It does not override existing env variables and you can’t force it to do so.

As a result of these frustrations, I decided to write my own module based on dotenv to fix this problem and make loading environment variables more convenient things. The result is node-env-run or nodenv. It’s a command-line tool that will load a .env file, initialize the values using dotenv and then execute your script.

You can install it globally but I recommend to only use it for development purposes and locally to the project. Install it by running:

Afterwards create a file nodenv-example.js and place this code in it:

As you can see, we don’t need to require anything here. It’s just the application logic. First try running it using node:

This executed code should output The value for FOO is: undefined. Now try using node-env-run by running:

The result should be The value for FOO is: bar since it loaded the .env file.

node-env-run can override existing values. To see it in action first run the following command:

The command-line output should say The value for FOO is: foo. If we now enable force mode we can override existing values:

As a result we should be back to the original The value for FOO is: bar.

If you want to use this tool regularly, I recommend that you wrap it into an npm script. By adding it in the package.json like so:

This way you can simply run:

Environment variables && npm scripts

There are scenarios where it’s useful to check the value of an environment variable before entering the Node.js application in npm scripts. For example if you want to use node-env-run when you are in a development environment but node when you are in production mode. A tool that makes this very easy is if-env. Install it by running:

Make sure to not install it as a “dev dependency” since we will require this in production as well.

Now simply modify your npm scripts in your package.json:

This script will now execute npm run start:prod and subsequently node . if NODE_ENV has the value production and otherwise it will execute npm run start:dev and subsequently nodenv -f .. You can do this technique with any other environment variable as well.

Try it out by running:

Debugging

We all know the moment where things are just not working the way you want it to and some module is not doing what it’s supposed to do. That’s the moment it’s time for debugging. One strategy that helped me a lot is using the DEBUG environment variable to receive more verbose logs for a bunch of modules. If you for example take a basic express server like this:

And start it up with the DEBUG variable set to *:

You’ll receive a bunch of extensive logging that looks something like this:

The “magic” behind it is a lightweight module called debug and its usage is super easy. When you want to use it all you have to do is to initialize it with a “namespace”. Afterwards you can log to that namespace. If someone wants to see the output all they have to do is enable the namespace in the DEBUG variable. express in this case uses a bunch of sub-namespaces. If you would want everything from the express router, all you have to do is set DEBUG with the appropriate wildcard:

Create .env File React

If you want to use debug in your own module all you have to do is to first install it:

And afterwards consume it the following way:

Now use all the environment variables!

These are by far not all the things you can do with environment variables and all the tools that exist but rather just the ones that I use most often. If you have any other great tools that you regularly use, I would love to hear about them!

• Email: dkundel@twilio.com
• Twitter: @dkundel
• GitHub: dkundel

Now that you’ve learned a bit more about Environment variables in Node.js, try out Twilio’s Node.js quickstarts!

How to Create an Environment Variable in Windows.